SPACE/SURFACE REQUIREMENTS – ALL CRITERIA MUST BE MET:

Dimensions:

at least 20’x20’ (absolute min. 16’x16’ – with a more limited performance), with 9’ minimum height

Surface:

• Unobstructed & flat
• Level, smooth*
• Hard
• Clean**
• Dry** 

If performing for a festival or event where people could potentially walk though the performance space, a barrier, fence, or staff must be provided to prevent injury to the performer or public.

If doing multiple performances:

Access to 3 prong power outlet to charge the LED cyr wheel between performances.

---

*Some less-than-smooth surfaces (for example some outdoor venues) can be accommodated, only for LED performances, though the surface will need to be approved in advance.  A good test for what qualifies as smooth vs. abrasive is if you fall down on your knees, will it scrape off skin? 

*In the case of of it being an abrasive surface for the LED wheel there will be a $200 charge as the skin of the wheel must be replaced.

**These must be true at the time of the Cyr Wheel performance, not just at the beginning of the show/event, so if preceding acts leave debris or moisture on the surface it must be removed prior to Cyr Wheel for safety reasons. Fog machines will often leave a slippery residue and/or condensation on the floor that is not noticeable for normal walking or dancing, but is particular- ly dangerous for Cyr Wheel.